PM15 EasyAir Compressor

Overview

It's Powerful.
The EasyAir (PM15) has a powerful 1/5 horsepower high performance compressor delivers a minimum of 13 lpm at 50 psi. MiniMate’s (PM5) powerful compressor delivers a flow rate of 4-13 lpm pressure of >10 psi, reducing treatment time–leaving more time for the other important activities of daily living. (Flow and pressure dependent on nebulizer used.)

It's Easy to Use.
The PM15F eliminates the need for pressure/flow calculations with a built-in flow gauge. The PM15P is available with a standard pressure gauge. All come with non-marring feet.

It's Lightweight.
The EasyAir is 22% lighter than compatible compressors. It weighs only 20.4 lbs making it much easier to carry. With a weight of only 3.5 lbs., the MiniMate is extremely easy to transport, giving patients a more active lifestyle. Smaller than most other units, it is easily carried with its built-in carry handle or attractive optional carry bag..

It's Safe.
Safety is assured with the automatic resetting thermal limit switch which protects the unit from overheating.

Proudly Made In the USA.    

Specifications

Dimensions:
Length: 16.0 in. (40.6 cm)
Width: 7.3 in. (18.4 cm)
Height: 10.3 in. (26.0 cm)
Weight:
Unit Weight: 1.4 lbs (9.3 kg)
Shipping Weight: 24 lbs (10.9 kg)
Electrical: 120VAC, 60Hz, 5Amps
Output: Set and read on the gauge (± 2lpm) PM15P minimum of 13 lpm @ 50 psi (3.45 bar)
Operating Temperature Range: 50°F. to 104°F. (10°C. to 40°C.)
Storage Conditions:
Temperature: -4°F. to 104°F. (-20°C. to 40°C.)
Humidity: Max 95% Non-condensing
Warranty 1 year

Literature

Title Language
application/pdf iconAir Compressor Brochure
 English
application/pdf iconPM15 EasyAir Compressor Brochure
 English

Certifications

The PM15F and PM15P (EasyAir Compressors) are not currently CE approved.

Ordering

EasyAir Compressor Flow

EasyAir Compressor Cabinet Style-(50 psi- 15 lpm) Standard AC Unit with built in Flow Gauge & J-Bracket
Order Information:
PM15F

EasyAir Compressor Pressure

EasyAir Compressor Cabinet Style-(50 psi- 15 lpm) Standard AC Unit with built in Flow Gauge & J-Bracket
Order Information:
PM15P

Filter

Order Information:
503237-10 (Pack of 10)

J Bracket

The J Bracket allows for attachment of wall-mounted nebulizers to the PM15 compressor. The bracket is constructed of stainless steel incorporating a female hex nut on the inlet and a male on the outlet.
Order Information:
PM15-1

Cooling Coil and Condensation Trap

The unit easily attaches to the outlet fitting of the PM15 Compressor with a hex nut and nipple. Condensation is collected in a visible bowl and can be removed by activating the quick release check on the bottom of the unit.
Order Information:
PM15-3: Cooling Coil with Condensation Trap (O2 90° DISS Male x Female)
PM15-3A: Cooling Coil with Condensation Trap (Air 90° DISS Male x Female)

Condensation Trap

Order Information:
PM15-4: Condensation Trap
PM15-41: Condensation Trap (Air DISS Male x DISS Female)
PM15-43: Condensation Trap (Air 90° DISS Male x DISS Female)
PM15-44: Condensation Trap (O2 90° DISS Male x Female)
PM15-45: Condensation Trap (Air 90° DISS Male x Female)

Flow Gauge

The flow gauge allows the user to set a flow rate in lpm when attached to compressor outlet fitting. It can be used with any 50 psi compressor.
Order Infomation:
PM15-5: Flow Gauge with Female Hex Nut 1" Stem
PM15-6: Flow Gauge with Female Hex Nut 1-1/2" Stem

Flow Gauge Bracket

The extension bracket allows for attachment of flow gauge when more height is needed using an all-purpose nebulizer.
Order Information:
PM15-7

Extended J Bracket

The Extension J Bracket allows for attachment of 1000cc humidifier bottle.
Order Information:
PM15-8

Roll Stand

The roll stand allows you to easily move a compressor or suction unit from room to room allowing easy placement anywhere. The stand shelf is large enough to accommodate any of Precision Medical’s air compressors, aspirators, or nebulizer compressors.
Order Information:
PM60-1

Warranty

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Precision Medical, Inc. warrants that EASY AIR 15 Compressor (the Product) will be free of defects in workmanship and/or material for the following period:

One (1) year from shipment

Should any failure to conform to this warranty appear within the applicable period, Precision Medical, Inc. shall, upon written
notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Precision
Medical, Inc.’s instructions and standard industry practice, and that no modifications, substitutions, or alterations have been made to
the goods, correct such defect by suitable repair or replacement at its own expense.

ORAL STATEMENTS DO NOT CONSTITUTE WARRANTIES.

The representatives of Precision Medical, Inc. or any retailers are not authorized to make oral warranties about the merchandise described
in this contract, and any such statements shall not be relied upon and are not part of the contract for sale. Thus, this writing is a final,
complete and exclusive statement of the terms of that contract.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESS OR IMPLIED.

Precision Medical, Inc. shall not under any circumstances be liable for special, incidental or consequential damages including but not
limited to lost profits, lost sales, or injury to person or property. Correction of non-conformities as provided above shall constitute
fulfillment of all liabilities of Precision Medical, Inc. whether based on contract, negligence, strict tort or otherwise. Precision Medical,
Inc. reserves the right to discontinue manufacture of any product or change product materials, designs, or specifications without notice.

Precision Medical, Inc. reserves the right to correct clerical or typographical errors without penalty.